Glue filling machine it runs at high speed, smooth, low noise, and can be up and down slope transmission advantages. The next step is to talk about the correct use of the glue filling machine and attention to matters? If you are interested, you may come here to learn about it. Maybe it can bring help to the people concerned.

        In the use of glue filling machine this product when we first need to master is its correct method. For example, it should check the tightness of the connections and valves. If you find a problem during the inspection, then it is definitely not operable. And the new use should also check its injection and suction capacity. Do these later then it should be in the ignition should first open the acetylene valve, after the opening of the oxygen valve; of course, its mouth hole shall not be to the people. So that in the use of glue filling machine need to pay attention to matters are more. Today here for you to tell is also to pay attention to. Of course, its welding nozzle due to continuous work overheating and bursting, should be cooled with water; in the use of the time you if you find the glue filling machine it due to clogging and bursting, should be discontinued, which is also a problem to pay attention to. If you you come to understand in advance then you can reduce the failure rate of letting. And it can continue to use only after picking through. These are also its operating methods. And in the time of use must pay attention to is it in accordance with the welding, cutting nozzle size, and then go to determine the oxygen and gas pressure and gas consumption. The nozzle of the product and the metal plate can not be sprayed.

        In addition, the staff in the use of the time if you find that the glue filling machine clogging occurs, our suggestion here is that you can use the needle to clean up, then this time you need to do is to remove the nozzle should be cleaned from the inside out. Then go to check the glue filling machine it's gasket and each link of the valve and so on whether the air leakage. In addition to this, then, in the use of glue filling machine also need to pay attention to is should be rubber off the air exclusion, this place is also to pay attention to. After the completion of the words and then open the oxygen and acetylene valves, smooth before ignition test welding. Of course, all parts of the equipment shall not be stained with oil. Its heat can not be too high, if too high need to use cold water cooling. And when it is in the ignition, in this you have to do is should first open the gas valve, ignition and then open the oxygen valve. And it's gas and oxygen valves such as leakage, this time to repair in time. In this way there will be no problem. It is also forbidden to bake with fire here, and it is not allowed to use oxygen to blow the acetylene pipeline. If you still don't understand what place, you can go to consult the professionals.

        The above content is for you to introduce the correct use of glue filling machine and pay attention to matters. I wonder if you have mastered it. About the other knowledge points of the glue filling machine will continue to update the next issue for you. If you have time, remember to come to watch.